INTERMEDIATE METAL CONDUIT
 Metric Data  |  Home   |  Sales Staff   |  Sales Agents  |  Distributor List
Rigid Steel Conduit   |   Electrical Metal Conduit   |   Electrical Conduit

HOT ZINC COATED
 Special clear secondary coating applied after galvanizing provides added corrosion protection Western IMC is produced by a continuous weld-galvanizing method using the most modern mills and Hot Galvanizing process
 
  • Approved by Article 342 of the National Electric Code for wherever Rigid Metal Conduit is used. 
  • Meets the requirements of American National Standards Institute (ANSI) C80.6.
  • Meets the requirements of  UL 1242. and is listed by Underwriter's Laboratory
  • Requires approximately 33% less steel than conventional steel Rigid Conduit.
  • Larger inside diameter permits easier wire-pulling.
  • Threaded to be interchangeable with Rigid Conduit fittings and elbows.
  • Requires no change in installation procedures: bending, cutting, threading, and hanging devices remain standard.

 

STANDARD PACKAGING
Western Intermediate Metal Conduit is shipped as follows:

1/2" 3500 ft. per standard lift 2170 lbs.
3/4" 2500 ft. per standard lift 2110 lbs.
1" 1700 ft. per standard lift 2030 lbs.
1 1/4" 1350 ft. per standard lift 2130 lbs.
1 1/2" 1100 ft. per standard lift 2130 lbs.
2" 800 ft. per standard lift 2050 lbs.
2 1/2" 370 ft. per standard lift 1630 lbs.
3" 300 ft. per standard lift 1630 lbs.
3 1/2" 240 ft. per standard lift 1510 lbs.
4" 240 ft. per standard lift 1680 lbs.


ARCHITECTS HOT ZINC COATED INTERMEDIATE METAL CONDUIT SPECIFICATIONS
To Specify Western IMC. include the following: Electrical Conductors shall be enclosed in Western Hot Zinc Coated. Intermediate Metal Conduit in accordance with the specifications of
the National Code Covering such conduit, and shall be listed by Underwriters Laboratories as manufactured by Western Tube & Conduit Corporation

WEIGHTS AND DIMENSIONS

SIZE DIAMETER
OUTSIDE		 DIAMETER
INSIDE		 WALL
THICKNESS		 LBS. PER 100FT.
WITH COUPLING		 THREADS
PER INCH		 LENGTH OF
THREAD		 COLOR CODE
THREAD PROTECTOR
1/2" 0.815 0.675 0.070 65 14 0.78 Yellow
3/4" 1.029 0.879 0.075 92 14 0.79 Green
1" 1.290 1.120 0.085 120 11 1/2 0.98 Orange
1 1/4" 1.638 1.468 0.085 153 11 1/2 1.01 Green
1 1/2" 1.883 1.703 0.090 188 11 1/2 1.03 Yellow
2" 2.360 2.170 0.095 251 11 1/2 1.06 Orange
2 1/2" 2.857 2.597 0.140 422 8 1.57 Yellow
3" 3.476 3.216 0.140 520 8 1.63 Orange
3 1/2" 3.971 3.711 0.140 605 8 1.68 Yellow
4" 4.466 4.206 0.140 674 8 1.73 Orange

IMC
 INTERMEDIATE METAL CONDUIT
Trade Size
Designator		 Outside
Diameter		 Wall
Thickness
NPS Metric IN MM IN MM
1/2" 16 0.815 20.7 0.078 1.98
3/4" 21 1.029 26.1 0.083 2.10
1" 27 1.290 32.8 0.093 2.36
1 1/4" 35 1.638 41.6 0.095 2.42
1 1/2" 41 1.883 47.8 0.100 2.54
2" 53 2.360 59.9 0.105 2.67
2 1/2" 63 2.857 72.6 0.150 3.81
3" 78 3.476 88.3 0.150 3.81
3 1/2" 91 3.971 100.9 0.150 3.81
4" 103 4.466 113.4 0.150 3.81
Normal Wt. Per
10 Unit Lengths
with Couplings		 Quantity
Per Bundles		 Lift Size NEMA
Crane Lift
LB KG Feet Meters Feet Meters LB KG
62 28.1 100 30.5 3500 1067.5 2170 984.1
84 38.1 50 15.2 2500 762.5 2100 952.4
119 54.0 50 15.2 1700 518.5 2023 917.5
158 71.7 10 3.0 1350 411.8 2133 967.3
194 88.0 10 3.0 1100 335.5 2134 967.8
256 116.1 10 3.0 800 244.0 2048 928.8
441 200.0 10 3.0 370 112.9 1632 741.1
543 246.3 10 3.0 300 91.5 1629 738.8
629 285.3 10 3.0 240 73.2 1510 684.8
700 317.5 10 3.0 240 73.2 1680 781.9

All specifications, tables of weights, packaging,
and dimensions subject to change without prior notice.

Metric Data  |  Home   |  Agent Map